Santee 14" 1-1/4" Black Ape Hangers Handlebars Harley Batwing Bagger 86-13
These bars are the latest offering from Santee
- Feature a "swedge" which means you get a smooth transition from the 1.25 in. diameter to the 1 in. area for mounting the OEM or any custom hand controls with 1 in. mounts
- This taper also allows you to rotate the control to any angle for both clearance and optimum comfort
- Constructed of steel tubing and CNC bent for smooth lines
- Comes pre-drilled and with a pull-wire already installed in the bars so pulling your wire harness through the bars will be much faster and easier
Dimensions:
Width - 37 1/2 in.
Rise - 13 1/2 in.
Pullback - 12 in.
Center Width - 12 1/2 in.
End Rise - 13 1/2 in.
1 in. Diameter Clamping Width - 5 in.
Inside Width of Knurling/Outside - 2 1/2 in. / 4 3/4 in.
Drilled for Internal Wiring
Three Notches for 08-up HD w/Electronic Throttle
These bars are the latest offering from Santee
- Feature a "swedge" which means you get a smooth transition from the 1.25 in. diameter to the 1 in. area for mounting the OEM or any custom hand controls with 1 in. mounts
- This taper also allows you to rotate the control to any angle for both clearance and optimum comfort
- Constructed of steel tubing and CNC bent for smooth lines
- Comes pre-drilled and with a pull-wire already installed in the bars so pulling your wire harness through the bars will be much faster and easier
Dimensions:
Width - 37 1/2 in.
Rise - 13 1/2 in.
Pullback - 12 in.
Center Width - 12 1/2 in.
End Rise - 13 1/2 in.
1 in. Diameter Clamping Width - 5 in.
Inside Width of Knurling/Outside - 2 1/2 in. / 4 3/4 in.
Drilled for Internal Wiring
Three Notches for 08-up HD w/Electronic Throttle
Fits: Harley Batwing models 86-13 FLH/FLT
Brand | Custom Chome |
---|---|
Manufacturer Part No. | 693681 |
Finish | Chrome |
Fitment | Harley Batwing models 86-13 FLH/FLT |
Additional Notes | CB |
Ships Within: | 5-7 Days |
Drag Part # | 0 |
Harley Batwing models 86-13 FLH/FLT
Manufacturer's Warranty
CB