MRI Matt Risley Innovation Electric Motorcycle Center Stand for Harley FLH/T 90-22

$850.00
Only 1 left
SKU
MRI-CNTR-STND

MRI Electric Center Stands fit Harley Davidson® Touring Bikes from 1990 to present. These stands bolt on in minutes and use a linear actuator to raise and lower the legs electronically. An air ride system must be used to lower the bike/stand to the ground. The two legs provide a very sturdy base, allowing the bike to sit upright while parked. MRI's stands come powder coated black, but could be chromed or painted to match your bike’s color.

All MRI Electric Center Stands have been redesigned to make fitment for all customers a breeze. No more measuring is needed!

Don't be fooled by others’ imitations; buy original, buy MRI.  
Trusted by the biggest names in the industry.

Model Fitment

A. 2006 and Earlier

B. 2007 and 2008
               
NOTE: Models with Legend Air Ride: The compressor unit will need to be moved from                            under the bike and relocated

C. 2009 and Later
               
NOTE: Does NOT work with cross under exhaust; Drag Specialties offers a pipe called True Duals                            that will convert an 09L OEM Cross Under Exhaust to work with our electric center stand.                             Models with Legend Air Ride installation requires separate purchase of MRI plumbing and                            line kit ($60.00).


Leg Kits

MRI Customs is now offering 4 different leg kits for proper fitment.  Each leg kit contains all the necessary components needed for an easy install, including: (2 sets*) of 5/16” steel legs, (2) 5/16” steel feet, (8) ¼” shims made of polycarbonate material (aka, bullet-proof glass) on a CNC, a wiring harness, and hardware pack.  Pictures provided below.

Kit #1

Our most popular leg kit.  Adjustable from 2 ¼ - 4 ½”, every ¼”.  Recommended for bikes with a 23”/26”/30” front wheel, with rear air ride only.

Kit 1-3.5

Adjustable from 1 - 3 ½”, every ¼”.  Recommended for bikes with a 26” or 30" front wheel, with both front and rear air ride.

Kit 3/4   

Adjustable from 3 ½ - 5 ½”, every ¼”.  Recommended for bikes with a 21" and under front wheel, with rear air ride only.

Kit No Hole*

"NEW" No Hole Leg available.  Adjustable from ¾” - 2”, every ¼”. Recommended for lay frame or close to lay frame bikes. *This kit contains only one set of legs.

LEG KIT MATRIX

Size of Front Wheel
Air Ride Suspention
Kit Needed
21" & Under   Kit 3/4
23"   Kit #1
26" Rear Only Kit #1
26" Front & Rear Kit 1-3.5
30" & Up Rear Only #1
30" & Up Front & Rear Kit 1-3.5

MRI Electric Center Stands fit Harley Davidson® Touring Bikes from 1990 to present. These stands bolt on in minutes and use a linear actuator to raise and lower the legs electronically. An air ride system must be used to lower the bike/stand to the ground. The two legs provide a very sturdy base, allowing the bike to sit upright while parked. MRI's stands come powder coated black, but could be chromed or painted to match your bike’s color.

All MRI Electric Center Stands have been redesigned to make fitment for all customers a breeze. No more measuring is needed!

Don't be fooled by others’ imitations; buy original, buy MRI.  
Trusted by the biggest names in the industry.

Model Fitment

A. 2006 and Earlier

B. 2007 and 2008
               
NOTE: Models with Legend Air Ride: The compressor unit will need to be moved from                            under the bike and relocated

C. 2009 and Later
               
NOTE: Does NOT work with cross under exhaust; Drag Specialties offers a pipe called True Duals                            that will convert an 09L OEM Cross Under Exhaust to work with our electric center stand.                             Models with Legend Air Ride installation requires separate purchase of MRI plumbing and                            line kit ($60.00).


Leg Kits

MRI Customs is now offering 4 different leg kits for proper fitment.  Each leg kit contains all the necessary components needed for an easy install, including: (2 sets*) of 5/16” steel legs, (2) 5/16” steel feet, (8) ¼” shims made of polycarbonate material (aka, bullet-proof glass) on a CNC, a wiring harness, and hardware pack.  Pictures provided below.

Kit #1

Our most popular leg kit.  Adjustable from 2 ¼ - 4 ½”, every ¼”.  Recommended for bikes with a 23”/26”/30” front wheel, with rear air ride only.

Kit 1-3.5

Adjustable from 1 - 3 ½”, every ¼”.  Recommended for bikes with a 26” or 30" front wheel, with both front and rear air ride.

Kit 3/4   

Adjustable from 3 ½ - 5 ½”, every ¼”.  Recommended for bikes with a 21" and under front wheel, with rear air ride only.

Kit No Hole*

"NEW" No Hole Leg available.  Adjustable from ¾” - 2”, every ¼”. Recommended for lay frame or close to lay frame bikes. *This kit contains only one set of legs.

LEG KIT MATRIX

Size of Front Wheel
Air Ride Suspention
Kit Needed
21" & Under   Kit 3/4
23"   Kit #1
26" Rear Only Kit #1
26" Front & Rear Kit 1-3.5
30" & Up Rear Only #1
30" & Up Front & Rear Kit 1-3.5
More Information
Brand MRI
Finish Chrome
Manufacturer Part No. MRI-CNTR-STND
Fitment 1990-2022 Harley Touring Models
Ships Within: 5-7 Days

1990-2022 Harley Touring Models

Manufacturer's Warranty

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Price Match Guarantee
© 2023 Eastern Performance. All Rights Reserved.