S&S Cycle 509G Grind Gear Drive Cam Gears Kit .509 Lift Harley Twin Cam 99-06

$948.95 $948.95 To see product price, add this item to your cart. You can always remove it later. What's this?
SKU
SS330-0017

IN BRAND NEW CONDITION

PART # 330-0017

DRAG PART # 0925-0540

TUCKER PART # 493914

Fits: 1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive

  • Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
  • Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
  • Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
  • Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
  • A hydraulic press and other professional-level tools are required to install these kits
  • S&S recommends that adjustable pushrod/cover kit PART # 93-5095 be used
  • Cam bearings and gaskets must be replaced when installing new cams
  • Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
  • Made in the U.S.A.

Note:  Installation kit required for proper installation - sold separately. 1999 Twin Cam will need to use the splined cam drive OEM 25716-99

509 SERIES GRIND CAMS

  • Lower lift allows them to be bolted into stock 96"-106" 06 engines with stock valve springs
  • Bolt-in cams for 88 CID engines with stock compression ration
  • Strongest from 1,000-4,500 rpm
  • 180 psi cranking compression; no need for compression releases
  • Great low and mid-range torque
 Grind  Open  Close  @ .053  Valve Lift

509 Series

 Intake  18°  49°  216°  .509
 Exhaust  46°  11°  237°  .509

 

 

 Grind  Open  Close  @ .053  Valve Lift

Stock Carburetors/Injected Cams

 Intake  -02° / 02°  38°/34°   216°/216°  .473
 Exhaust  36°  04/04°  220/220°  .473

IN BRAND NEW CONDITION

PART # 330-0017

DRAG PART # 0925-0540

TUCKER PART # 493914

Fits: 1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive

  • Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
  • Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
  • Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
  • Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
  • A hydraulic press and other professional-level tools are required to install these kits
  • S&S recommends that adjustable pushrod/cover kit PART # 93-5095 be used
  • Cam bearings and gaskets must be replaced when installing new cams
  • Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
  • Made in the U.S.A.

Note:  Installation kit required for proper installation - sold separately. 1999 Twin Cam will need to use the splined cam drive OEM 25716-99

509 SERIES GRIND CAMS

  • Lower lift allows them to be bolted into stock 96"-106" 06 engines with stock valve springs
  • Bolt-in cams for 88 CID engines with stock compression ration
  • Strongest from 1,000-4,500 rpm
  • 180 psi cranking compression; no need for compression releases
  • Great low and mid-range torque
 Grind  Open  Close  @ .053  Valve Lift

509 Series

 Intake  18°  49°  216°  .509
 Exhaust  46°  11°  237°  .509

 

 

 Grind  Open  Close  @ .053  Valve Lift

Stock Carburetors/Injected Cams

 Intake  -02° / 02°  38°/34°   216°/216°  .473
 Exhaust  36°  04/04°  220/220°  .473
More Information
Brand S&S Cycle
Finish Raw
Drag Part # 0925-0540
Tucker Part # 493914
Manufacturer Part No. 330-0017
Fitment 1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive
Ships Within: 24 Hrs

1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive

S&S Cycle Manufacturer's Warranty

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Price Match Guarantee
© 2023 Eastern Performance. All Rights Reserved.