S&S Cycle 510C Grind Chain Drive Bolt In Cam Kit .510 Lift Harley Twin Cam 99-06
SKU
SS33-5182A
- Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART # 288015 be used
- Made in the U.S.A.
Note: Installation kit required for proper installation - sold separately. 1999 Twin Cam will need to use the splined cam drive OEM 25716-99
510 SERIES GRIND CAMS
- Strongest from 3,000-5,000 rpm
- 510G/510C cams are designed as bolt-in cam for 88", 95", 96" and 103" engines with compression ratios below 9.7:1
- Stock pushrods and valve springs acceptable
| Grind | Open | Close | @ .053 | Valve Lift |
510 Series |
||||
| Intake | 20° | 38° | 238° | .510 |
| Exhaust | 52° | 20° | 252° | .510 |
| Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
| Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
| Exhaust | 36° | 04/04° | 220/220° | .473 |
Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART # 288015 be used
- Made in the U.S.A.
Note: Installation kit required for proper installation - sold separately. 1999 Twin Cam will need to use the splined cam drive OEM 25716-99
510 SERIES GRIND CAMS
- Strongest from 3,000-5,000 rpm
- 510G/510C cams are designed as bolt-in cam for 88", 95", 96" and 103" engines with compression ratios below 9.7:1
- Stock pushrods and valve springs acceptable
| Grind | Open | Close | @ .053 | Valve Lift |
510 Series |
||||
| Intake | 20° | 38° | 238° | .510 |
| Exhaust | 52° | 20° | 252° | .510 |
| Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
| Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
| Exhaust | 36° | 04/04° | 220/220° | .473 |
Fits: 1999-2006 Harley Twin Cam Models (Excluding 06 Dyna) with Chain Drive
| Brand | S&S Cycle |
|---|---|
| Finish | Raw |
| Drag Part # | 0925-0532 |
| Tucker Part # | 498560 |
| Manufacturer Part No. | 33-5182A |
| Fitment | 1999-2006 Harley Twin Cam Models (Excluding 06 Dyna) with Chain Drive |
| Ships Within: | 24 Hrs |
1999-2006 Harley Twin Cam Models (Excluding 06 Dyna) with Chain Drive
S&S Cycle Manufacturer's Warranty
Write Your Own Review
