S&S Cycle 570 EZ Easy Start Gear Drive Cams .570 Lift Harley Twin Cam 07-16
SKU
SS106-5221
IN BRAND NEW CONDITION
PART # 106-5221
DRAG PART # 0925-0449
TUCKER PART # 498457
Fits: 2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models
- Start any engine regardless of displacement or compression ratio with a stock starter
- Save your starter and battery; tested for 10,000 starts without running battery down
- Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- All gear-drive cams include 4-gear set and installation kit
- Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
- Made in the U.S.A.
570 EZ CAMS
- Compression ratios below 10:1
- For 88/95/96/103 cubic-inch engines
- 99-04 models require high-lift springs
| Grind | Open | Close | @ .053 | Valve Lift |
570 EZ Start |
||||
| Intake | 20° | 40° | 240° | .570 |
| Exhaust | 55° | 20° | 250° | .570 |
| Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
| Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
| Exhaust | 36 Degree | 04/04 Degree | 220/220 Degree | .473 |
IN BRAND NEW CONDITION
PART # 106-5221
DRAG PART # 0925-0449
TUCKER PART # 498457
Fits: 2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models
- Start any engine regardless of displacement or compression ratio with a stock starter
- Save your starter and battery; tested for 10,000 starts without running battery down
- Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- All gear-drive cams include 4-gear set and installation kit
- Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
- Made in the U.S.A.
570 EZ CAMS
- Compression ratios below 10:1
- For 88/95/96/103 cubic-inch engines
- 99-04 models require high-lift springs
| Grind | Open | Close | @ .053 | Valve Lift |
570 EZ Start |
||||
| Intake | 20° | 40° | 240° | .570 |
| Exhaust | 55° | 20° | 250° | .570 |
| Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
| Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
| Exhaust | 36 Degree | 04/04 Degree | 220/220 Degree | .473 |
| Brand | S&S Cycle |
|---|---|
| Finish | Raw |
| Drag Part # | 0925-0449 |
| Tucker Part # | 498457 |
| Manufacturer Part No. | 106-5221 |
| Fitment | 2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models |
| Ships Within: | 24 Hrs |
2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models
S&S Cycle Manufacturer's Warranty
Write Your Own Review
