S&S Cycle 585G Grind Gear Drive Cam Gears Kit .585 Lift Harley Twin Cam 07-16
SKU
SS33-5268
IN BRAND NEW CONDITION
PART # 33-5268
DRAG PART # 0925-0158
TUCKER PART # 496182
Fits:2006-2015 Harley-Davidson Dyna Models and 2007-2015 harley-Davidson Twin Cam FLH/FLT Softail Models
- Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
- Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
- Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
- Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
- A hydraulic press and other professional-level tools are required to install these kits
- S&S recommends that adjustable pushrod/cover kit PART # 93-5095 be used
- Cam bearings and gaskets must be replaced when installing new cams
- Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
- Made in the U.S.A.
585 SERIES GRIND CAMS
- 585G gear drive cams are for 88/96/103/110 cubic-inch engines with compression ratios from 10:1 to 10.5:1
- Strongest from 3,500-6,000
- 99-04 models require high lift springs
| Grind | Open | Close | @ .053 | Valve Lift |
585 Series |
||||
| Intake | 20° | 45° | 245° | .585 |
| Exhaust | 60° | 20° | 260° | .585 |
| Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
| Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
| Exhaust | 36° | 04/04° | 220/220° | .473 |
IN BRAND NEW CONDITION
PART # 33-5268
DRAG PART # 0925-0158
TUCKER PART # 496182
Fits:2006-2015 Harley-Davidson Dyna Models and 2007-2015 harley-Davidson Twin Cam FLH/FLT Softail Models
- Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely-fit stock chain drive
- Reverses the rear cam's direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit
- Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions
- Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams
- A hydraulic press and other professional-level tools are required to install these kits
- S&S recommends that adjustable pushrod/cover kit PART # 93-5095 be used
- Cam bearings and gaskets must be replaced when installing new cams
- Cams are also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
- Made in the U.S.A.
585 SERIES GRIND CAMS
- 585G gear drive cams are for 88/96/103/110 cubic-inch engines with compression ratios from 10:1 to 10.5:1
- Strongest from 3,500-6,000
- 99-04 models require high lift springs
| Grind | Open | Close | @ .053 | Valve Lift |
585 Series |
||||
| Intake | 20° | 45° | 245° | .585 |
| Exhaust | 60° | 20° | 260° | .585 |
| Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
| Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
| Exhaust | 36° | 04/04° | 220/220° | .473 |
| Brand | S&S Cycle |
|---|---|
| Finish | Raw |
| Drag Part # | 0925-0158 |
| Tucker Part # | 496182 |
| Manufacturer Part No. | 33-5268 |
| Fitment | 2006-2015 Harley-Davidson Dyna Models and 2007-2015 harley-Davidson Twin Cam FLH/FLT Softail Models |
| Ships Within: | 24 Hrs |
2006-2015 Harley-Davidson Dyna Models and 2007-2015 harley-Davidson Twin Cam FLH/FLT Softail Models
S&S Cycle Manufacturer's Warranty
Write Your Own Review
