XK Chrome XK-UTV-ADV Advanced App Control LED Accent Light Kit Off Road UTV ATV
$369.99
Only 1 left
SKU
XK-UTV-ADV
Built with 16 bit gamma correction, XKchrome provides over 16 million vibrant colors, allowing the user to choose any color with a single tap. Each controller has two zones that can simultaneously run different colors and patterns, allowing more room for creativity and uniqueness compared to other brand LED lights. Up to 6 controllers (12 zones) can be connected at the same time.
With the latest app update, XKchrome can seamlessly transit lights from one color to another and tune the light brighter as you move faster, turning your vehicle into a beast that breaths light! All these new features updates are free so you can get the most out of XKchrome with your imagination.
Brake light visibility is the top concern for motorsports safety at night. Now with the integrated Smart Brake sensor wire, XKchrome can turn the entire led whip into a brake light! As soon as you apply the brake, XKchrome immediately switches all LED lights on in red. This significantly increases the atv/utv's visibility, and promotes faster reaction of the vehicle behind.
XKchrome's Music Sync feature enables lights to dance with the rhythm of any song in your phone, or with any sound picked up by the microphone. To maximize visual effect, our adaptive algorithm dynamically adjusts the volume sensitivity. No matter if it's a country music or a hard rock, just lay back and enjoy the full spectrum you defined for your favorite song.
With XKchrome's realtime "chameleon" feature, you can paint your ride with any color you see. Whether it's a bright shirt or a stunning paint job, just point your phone's camera to it. XKchrome instantly turns your ATV/UTV into the very same eye-catching color, without even a finger tap. Be prepared to be in AWE!
Over 15 themes for special occasions throughout the year. It even comes with an "emergency pattern" in case you parked at the side of the road in the dark. In addition, users can fully customize their own themes with various pattern, speed, and up to 10 color combinations.
XKchrome can do more than lighting. Thanks to its built-in Bluetooth Smart Beacon, XKchrome helps locate your parked vehicle. When you walk away after parking, XKchrome app will automatically pin down your location. So that you can easily look it up in the app when you need to find the way back. Once you get close enough, you can also turn on the lights to single your vehicle out from the endless parking row.
SPECS:
- iOS device compatibility: iPhone 4S or higher; iPad 3 or higher; iPad Mini or higher, iPod Touch 5th gen or higher.
- Android device compatibility: Must be equipped with Bluetooth 4.0 (BLE) and Android 4.4 or higher version system.
- Controller Max load: 3A per zone. (Each controller has 2 zones)
- Light power consumption: 0.05A per pod. 0.15A per 12" tube. 0.3A per 24" tube.
- Input voltage: 9-15V DC.
- Brake sensor input voltage: 12V.
- Reversed polarity protection: Yes.
- Transient voltage suppression: Yes.
- Controller Dimension: 4" x 2.33 x 0.73" (100 x 60 x 19cm)
INCLUDES:
- 1pc XKchrome BLE 4.0 app controller.
- 2pc 24" LED tube.
- 14pc 12" LED tube.
- 18pc compact pods.
- ON/OFF switch wire.
- Detailed Mounting Instructions
Built with 16 bit gamma correction, XKchrome provides over 16 million vibrant colors, allowing the user to choose any color with a single tap. Each controller has two zones that can simultaneously run different colors and patterns, allowing more room for creativity and uniqueness compared to other brand LED lights. Up to 6 controllers (12 zones) can be connected at the same time.
With the latest app update, XKchrome can seamlessly transit lights from one color to another and tune the light brighter as you move faster, turning your vehicle into a beast that breaths light! All these new features updates are free so you can get the most out of XKchrome with your imagination.
Brake light visibility is the top concern for motorsports safety at night. Now with the integrated Smart Brake sensor wire, XKchrome can turn the entire led whip into a brake light! As soon as you apply the brake, XKchrome immediately switches all LED lights on in red. This significantly increases the atv/utv's visibility, and promotes faster reaction of the vehicle behind.
XKchrome's Music Sync feature enables lights to dance with the rhythm of any song in your phone, or with any sound picked up by the microphone. To maximize visual effect, our adaptive algorithm dynamically adjusts the volume sensitivity. No matter if it's a country music or a hard rock, just lay back and enjoy the full spectrum you defined for your favorite song.
With XKchrome's realtime "chameleon" feature, you can paint your ride with any color you see. Whether it's a bright shirt or a stunning paint job, just point your phone's camera to it. XKchrome instantly turns your ATV/UTV into the very same eye-catching color, without even a finger tap. Be prepared to be in AWE!
Over 15 themes for special occasions throughout the year. It even comes with an "emergency pattern" in case you parked at the side of the road in the dark. In addition, users can fully customize their own themes with various pattern, speed, and up to 10 color combinations.
XKchrome can do more than lighting. Thanks to its built-in Bluetooth Smart Beacon, XKchrome helps locate your parked vehicle. When you walk away after parking, XKchrome app will automatically pin down your location. So that you can easily look it up in the app when you need to find the way back. Once you get close enough, you can also turn on the lights to single your vehicle out from the endless parking row.
SPECS:
- iOS device compatibility: iPhone 4S or higher; iPad 3 or higher; iPad Mini or higher, iPod Touch 5th gen or higher.
- Android device compatibility: Must be equipped with Bluetooth 4.0 (BLE) and Android 4.4 or higher version system.
- Controller Max load: 3A per zone. (Each controller has 2 zones)
- Light power consumption: 0.05A per pod. 0.15A per 12" tube. 0.3A per 24" tube.
- Input voltage: 9-15V DC.
- Brake sensor input voltage: 12V.
- Reversed polarity protection: Yes.
- Transient voltage suppression: Yes.
- Controller Dimension: 4" x 2.33 x 0.73" (100 x 60 x 19cm)
INCLUDES:
- 1pc XKchrome BLE 4.0 app controller.
- 2pc 24" LED tube.
- 14pc 12" LED tube.
- 18pc compact pods.
- ON/OFF switch wire.
- Detailed Mounting Instructions
FITMENT:
- Universal for all UTV, ATV, snowmobiles with 12V DC.
| Brand | XK Chrome |
|---|---|
| Manufacturer Part No. | XK-UTV-ADV |
| Fitment |
|
| Additional Notes | BI |
| Ships Within: | 5-7 Days |
- Universal for all UTV, ATV, snowmobiles with 12V DC.
Manufacture's Warranty
BI
Write Your Own Review
Related Products
Check items to add to the cart or
