Vance & Hines 61003A Fuel Pak Pack EFI Tuner Harley Touring Models 02-07
-Throttle position sensor-based system simplifies the process of fuel-injection tuning
-Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button
-Increases power and improves throttle response
-Very user friendly; plugs into the existing harness on the bike
-No computer or software is required; simply punch in the values provided on the V&H website
-Values provided are for use with Vance & Hines exhaust systems
-Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information)
-Includes all necessary mounting hardware
-MANUFACTURER'S NOTE: Not legal for sale or use on pollution controlled vehicles (Original Fuelpak).
-MANUFACTURER'S NOTE: EO #D-632-1 (C.A.R.B. approved Fuelpak).
-MANUFACTURER'S NOTE: Requires the use of a high-performance air filter.
-Throttle position sensor-based system simplifies the process of fuel-injection tuning
-Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button
-Increases power and improves throttle response
-Very user friendly; plugs into the existing harness on the bike
-No computer or software is required; simply punch in the values provided on the V&H website
-Values provided are for use with Vance & Hines exhaust systems
-Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information)
-Includes all necessary mounting hardware
-MANUFACTURER'S NOTE: Not legal for sale or use on pollution controlled vehicles (Original Fuelpak).
-MANUFACTURER'S NOTE: EO #D-632-1 (C.A.R.B. approved Fuelpak).
-MANUFACTURER'S NOTE: Requires the use of a high-performance air filter.
Fits: 2002-2007 Harley Touring EFI Models
Brand | Vance & Hines |
---|---|
Drag Part # | 1020-0361 |
Tucker Part # | VH5015 |
Manufacturer Part No. | 61003A |
Fitment | 2002-2007 Harley Touring EFI Models |
Ships Within: | 5-7 Days |
2002-2007 Harley Touring EFI Models
All of Vance & Hine's exhaust systems are warranted against defects in material and/or workmanship for a period of 90 days. This does not cover finishes such as plating, or painted surfaces with discoloration or rust. This warranty shall be limited to the repair or replacement of the system, which may be proven defective under normal use. We will not warranty any system that has been abused, misused, improperly installed, or modified. Dealers or distributors are not authorized to make dispositions binding upon Vance & Hines. We will not be responsible for any labor charges incurred in removing or replacing any system under warranty. All returns must be accompanied by a return authorization number and a copy of the purchase invoice. Parts being returned without a return authorization may be refused at Vance & Hine's receiving docks.