Ciro Frame Mounted Highway Peg 1/2 Male Mount Kit for Harley 09-24 Touring
Out of stock
Only %1 left
SKU
CIRO-HWPMK-CONFIG
- Strong, adjustable mounting system with a design that integrates into the floorboard area without being obtrusive
- Folds out of the way and are the best option with fairing lowers
- Replaces factory front floorboard mount, no drilling or modifications needed for installation
- Mounts to factory bolt locations
- Includes left and right floorboard mounts, left and right arms, and left and right clevises
- All necessary hardware for completing installation provided
- If you have aftermarket exhaust check the right side floorboard mounts. If they have spacers installed you will need one more to install the Ciro Frame Mounted HWY Peg Mounts. You might also need a longer bolt (3/8-16) to go with the spacer. The spacer and bolt can be found at most hardware stores or from your exhaust manufacturer. The additional spacer is needed because the Ciro design uses one more bolt than the stock front floorboard mount.
- Works with OEM and aftermarket footpegs with Harley-Davidson style 1/2" male mount.
- Works with or without engine guards.
- Will not work with Harley-Davidson Empire Rider Footboard kits.
- Strong, adjustable mounting system with a design that integrates into the floorboard area without being obtrusive
- Folds out of the way and are the best option with fairing lowers
- Replaces factory front floorboard mount, no drilling or modifications needed for installation
- Mounts to factory bolt locations
- Includes left and right floorboard mounts, left and right arms, and left and right clevises
- All necessary hardware for completing installation provided
- If you have aftermarket exhaust check the right side floorboard mounts. If they have spacers installed you will need one more to install the Ciro Frame Mounted HWY Peg Mounts. You might also need a longer bolt (3/8-16) to go with the spacer. The spacer and bolt can be found at most hardware stores or from your exhaust manufacturer. The additional spacer is needed because the Ciro design uses one more bolt than the stock front floorboard mount.
- Works with OEM and aftermarket footpegs with Harley-Davidson style 1/2" male mount.
- Works with or without engine guards.
- Will not work with Harley-Davidson Empire Rider Footboard kits.
| Brand | Ciro |
|---|---|
| Drag Part # | 1620-2664, 1620-2666, 1620-2665, 1620-2667 |
| Manufacturer Part No. | 60101, 60601, 60121, 60621 |
| Fitment | 2009-2024 Harley Touring Models |
| Additional Notes | Perfect solution to the challenge of adding comfortable highway pegs on a bike with driver floorboards. |
| Ships Within: | 24 Hrs |
2009-2024 Harley Touring Models
Manufacturer's Warranty
Perfect solution to the challenge of adding comfortable highway pegs on a bike with driver floorboards.
Write Your Own Review
