Cobra 6224 Speedster Short Swept Chrome PowerPort 2:2 Exhaust Harley Softail 07-11
- PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone
- PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
- Large 2.5", 222°, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing
- The Short Swept system is a shortened version of Cobra's successful Swept Speedster line of exhausts, but in a shorter, more radical design
- Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish
- Includes mounting hardware and removable baffles for simple installation
- Power with social responsibility
- Made in the U.S.A.
NOTE: The Softail Swept exhaust requires the removal of the right-side passenger footpeg on select models; optional relocation bracket curves up from under the pipe to relocate the peg in the proper position.
Disclaimer: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emission-related parts, devices, or systems that alter the performance of OEM emission-related devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer's information
- PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone
- PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
- Large 2.5", 222°, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing
- The Short Swept system is a shortened version of Cobra's successful Swept Speedster line of exhausts, but in a shorter, more radical design
- Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish
- Includes mounting hardware and removable baffles for simple installation
- Power with social responsibility
- Made in the U.S.A.
NOTE: The Softail Swept exhaust requires the removal of the right-side passenger footpeg on select models; optional relocation bracket curves up from under the pipe to relocate the peg in the proper position.
Disclaimer: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emission-related parts, devices, or systems that alter the performance of OEM emission-related devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer's information
Fits: 2007-2011 Harley Softail Models (excluding Rocker and 09 Springer CVO)
2007-2011 Harley Softail Models (excluding Rocker and 09 Springer CVO)
Manufacturer's Warranty
