Custom Dynamics Dynamic Amber and Red Flat Clusters Run Turn Brake LED Light for Harley
Dynamic Clusters2™ are a multi-color LED Clusters used for rear turn signal applications. The clusters are 2" in diameter and contains 48 super bright LEDs. The inner ring contains Amber LEDs while all outer LEDs are dual intensity Red. The Amber LEDs are connected to a 1156 base while the dual intensity Red LEDs are connected to 3' wire pigtails.
These clusters can be wired as: Red Low Intensity Running Light, Red High Intensity Brake Light, and Amber High Intensity Turn Signals, this allows your rear turn signals to be converted from simple turn signals to Dynamic running, brake, and turns signals, all in one unit!!! Installation is very simple, just plug the 1156 base to the stock turn signal housing receptacle, run the orange running light wire and the red brake light wires through the stock turn signal steams back to the taillight, connect the orange wire to the stock running light and the red wire to the stock brake light wire with the supplied posi-tap connectors.
Dynamic Clusters2™ can be used with Amber, Clear or Smoked Lenses, check out our lenses here. The Red LEDs are so powerful they will shine Red through most stock Amber lenses, however a more dynamic effect can be achieved with smoked or clear lenses.
Dynamic Clusters2™ have a Lifetime warranty against LED failure.
A load equalizer may be needed to slow down turn signal flash rate.
File Picture Used
Fits: Flat FL Style Lens
Dynamic Clusters2™ are a multi-color LED Clusters used for rear turn signal applications. The clusters are 2" in diameter and contains 48 super bright LEDs. The inner ring contains Amber LEDs while all outer LEDs are dual intensity Red. The Amber LEDs are connected to a 1156 base while the dual intensity Red LEDs are connected to 3' wire pigtails.
These clusters can be wired as: Red Low Intensity Running Light, Red High Intensity Brake Light, and Amber High Intensity Turn Signals, this allows your rear turn signals to be converted from simple turn signals to Dynamic running, brake, and turns signals, all in one unit!!! Installation is very simple, just plug the 1156 base to the stock turn signal housing receptacle, run the orange running light wire and the red brake light wires through the stock turn signal steams back to the taillight, connect the orange wire to the stock running light and the red wire to the stock brake light wire with the supplied posi-tap connectors.
Dynamic Clusters2™ can be used with Amber, Clear or Smoked Lenses, check out our lenses here. The Red LEDs are so powerful they will shine Red through most stock Amber lenses, however a more dynamic effect can be achieved with smoked or clear lenses.
Dynamic Clusters2™ have a Lifetime warranty against LED failure.
A load equalizer may be needed to slow down turn signal flash rate.
File Picture Used
Fits: Flat FL Style Lens
Brand | Custom Dynamics |
---|---|
Manufacturer Part No. | GEN-200-AR2-1156-T |
Fitment | Fits: 1994-2013 Harley Models with Single Circuit Rear Flat Turn Signals |
Ships Within: | 5-7 Days |
Fits: 1994-2013 Harley Models with Single Circuit Rear Flat Turn Signals
Manufacturer's Warranty