Custom Dynamics Red Color 10" Plasma Rods Harley Touring & Softail w/ Bags

Plasma Rods™ use a patented LED technology to produce a bright, incredibly smooth light output. Plasma Rods™ can mount about anywhere but they work great between your saddlebags & fender/filler panel. Units are pre-taped for mounting to left and right sides of the motorcycle. With their smoke lens, Plasma Rods™ are almost invisible when off.

Use 8" length for OEM H-D™ rear fender/saddlebags  and 10", 12" or 14" length for extended bags.

Plug and play Plasma Rods™ are offered as dual intensity dim red running light with high intensity function (depending on model) and equipped with a plug and play connector and in-line quick disconnect for a simple install when used with one of the Plasma Rods™ Wiring Adapters (sold separately). Plug and plug configurations require only the purchase of the LED Plasma Rods™ and corresponding wiring adapter to fit your motorcycle, no additional converters or modules necessary to acheive advertised functions. 

Hardwire versions available as single function power (+) and ground (-) and requires Plasma Rods™ Dual Converter or Eclipze2® Module (sold separately) to convert to dual intensity, 3 wire system when hardwire version is selected. 

Red Plasma Rods™ are also compatible with Custom Dynamics® SMART Triple Play® Run/Brake/Turn module (sold separately) on models with corresponding fitment to function as dim running light, full intensity brake light & full contrast red turn signal flash without any additional harnesses required.

Dual Color Plasma Rods™ are also available as an all-in-one solution with built in dim red running light, full intensity red brake light and full contrast amber turn signal. 

Plasma Rods™ Installation Information can be found in Custom Dynamics® Tech Help Center. 

Note: This product is designed and intended only for use as auxiliary lighting on motorcycles only. This product is NOT intended to replace any original equipment lighting installed on the motorcycle and should not be used for that purpose.  This product must be wired such that it does not interfere with any original equipment lighting.