Feuling HP+ Complete Camchest Kit w/ Reaper 543 Gear Drive Cam Harley 99-06
- Take the guesswork out of ordering
- All necessary components from top-to-bottom of the camchest
- Each part works and functions together in total harmony
- Provide maximum reliability, longevity, peak performance, and the coolest engine and oil temperatures obtainable
- Include Feuling® HP+® high-volume oil pump, high-flow billet cam plate, REAPER® Series camshafts, HP+® hydraulic roller lifters, Fast Install® adjustable pushrods, Timken®/Koyo® bearings, gaskets, O-rings, hardware, ARP® fasteners, washers, moly lube and Loctite®
NOTE: Installation of gear drive cams will require separate purchase of S&S or Andrews 4-gear drive kit
Reaper 543 CAMS
- Produce more power and torque in the riding RPM range increasing throttle response, acceleration and fuel mileage
- Wide lobe separations produce wide power bands
- Smooth camshaft lobe ramps are easier on valve-train components and eliminate excessive valve-train noise and wear
- Dyno proven and track tested
- Made in the U.S.A.
- Cam is easy starting, increases throttle response and fuel mileage. Responds well to increased compression ratio, performance exhaust and a high-flow air cleaner
- The 'Freeway Flyer', great camshafts for those who want more top end power than the 525 cams without sacrificing low end torque
- 1,900 - 6,000 rpm power range
- Extremely smooth cam lobe layout maintains quiet valve train and produces the smoothest cruise power band available
- Excellent bolt-in camshaft for stock to mild 96" and 103" engines and works well in 88" and 95" engines
- Performance valve springs are required on 99-04 engines and performance pushrods and lifters are recommended but not required
Disclaimer: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emission-related parts, devices, or systems that alter the performance of OEM emission-related devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer's information.
- Take the guesswork out of ordering
- All necessary components from top-to-bottom of the camchest
- Each part works and functions together in total harmony
- Provide maximum reliability, longevity, peak performance, and the coolest engine and oil temperatures obtainable
- Include Feuling® HP+® high-volume oil pump, high-flow billet cam plate, REAPER® Series camshafts, HP+® hydraulic roller lifters, Fast Install® adjustable pushrods, Timken®/Koyo® bearings, gaskets, O-rings, hardware, ARP® fasteners, washers, moly lube and Loctite®
NOTE: Installation of gear drive cams will require separate purchase of S&S or Andrews 4-gear drive kit
Reaper 543 CAMS
- Produce more power and torque in the riding RPM range increasing throttle response, acceleration and fuel mileage
- Wide lobe separations produce wide power bands
- Smooth camshaft lobe ramps are easier on valve-train components and eliminate excessive valve-train noise and wear
- Dyno proven and track tested
- Made in the U.S.A.
- Cam is easy starting, increases throttle response and fuel mileage. Responds well to increased compression ratio, performance exhaust and a high-flow air cleaner
- The 'Freeway Flyer', great camshafts for those who want more top end power than the 525 cams without sacrificing low end torque
- 1,900 - 6,000 rpm power range
- Extremely smooth cam lobe layout maintains quiet valve train and produces the smoothest cruise power band available
- Excellent bolt-in camshaft for stock to mild 96" and 103" engines and works well in 88" and 95" engines
- Performance valve springs are required on 99-04 engines and performance pushrods and lifters are recommended but not required
Disclaimer: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emission-related parts, devices, or systems that alter the performance of OEM emission-related devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer's information.
Fits: 1999-2006 Harley Twin Cam Models (Excluding 06 Dyna) with Gear Drive ( Installation kit required for proper installation - sold separately)
Brand | Feuling |
---|---|
Finish | Raw |
Drag Part # | 0925-0683 |
Tucker Part # | #N/A |
Manufacturer Part No. | 7232 |
Fitment | 1999-2006 Harley Twin Cam Models (Excluding 06 Dyna) with Gear Drive ( Installation kit required for proper installation - sold separately) |
Ships Within: | 5-7 Days |
1999-2006 Harley Twin Cam Models (Excluding 06 Dyna) with Gear Drive ( Installation kit required for proper installation - sold separately)
Manufacturer's Warranty