J&M ROKKER XXRP 800w 4-CH DSP Stage 5 Amp 14-20 Harley FLHX Rears / Lowers

Regular Price $999.99 Special Price $849.95
Out of stock
SKU
JAMP-800HC14-SGP-ST5

This is the new J&M STAGE-5 ROKKER® XXR Custom 800w 4-channel amplifier kit for 2014-2020 Harley® StreetGlide (NOT for CVO) with the Harley 4.3 Std, 6.5GT or new GTS touch-screen radio, with rear-lid or lower-fairing speakers added.

Full range class D amplifier, spec'd at 200watts RMS per channel X4, (800w total) into 2-ohm load @ 14.4vdc, (Manually selectable on the amplifier itself for a 2-ohm or 4-ohm speaker load) properly shielded against RF interference into the AM or FM radio.

Amplifier uses advanced digital switching power supply technology to dramatically reduce the 12v current demands on the motorcycle electrical system.

Amplifier mounts to custom made stainless steel 2-piece bracket system, to provide solid and secure mounting inside the StreetGlide fairing.

This amplifier kit is custom tuned for use in conjunction with your specially FLASHED Harley Infotainment radio (“J&M Corporation Custom Audio Flash” menu option w/Techno-Research digital technician), to provide THE BEST on-highway volume, clarity and overall performance available, from your music source selections of FM stereo, XM sat radio, Smartphone or USB thumb drive.

(Harley Infotainment/BoomBox radio can also be shipped to the J&M factory in Tucson for FLASHING, there is a separate $75 fee for the “J&M Corporation Custom Audio” Harley radio FLASH).

To alter these DSP settings using the internal programming dongle already built into this new amplifier, (USB computer connection cable included) our specific custom amplifier programs are now available as a consumer download from the J&M website, along with the custom Bike-Builder’s-App for those who want to fine tune their own specific amplifier adjustments.

Custom made plug-n-play wiring harnesses are included, along with heavy gauge power/ground wires for the fused battery connection, all necessary mounting hardware & complete installation/operation instructions.

Amplifier itself measures 8 1/4” Long X 5 1/8” Wide X 1 5/8” Tall.

This is the new J&M STAGE-5 ROKKER® XXR Custom 800w 4-channel amplifier kit for 2014-2020 Harley® StreetGlide (NOT for CVO) with the Harley 4.3 Std, 6.5GT or new GTS touch-screen radio, with rear-lid or lower-fairing speakers added.

Full range class D amplifier, spec'd at 200watts RMS per channel X4, (800w total) into 2-ohm load @ 14.4vdc, (Manually selectable on the amplifier itself for a 2-ohm or 4-ohm speaker load) properly shielded against RF interference into the AM or FM radio.

Amplifier uses advanced digital switching power supply technology to dramatically reduce the 12v current demands on the motorcycle electrical system.

Amplifier mounts to custom made stainless steel 2-piece bracket system, to provide solid and secure mounting inside the StreetGlide fairing.

This amplifier kit is custom tuned for use in conjunction with your specially FLASHED Harley Infotainment radio (“J&M Corporation Custom Audio Flash” menu option w/Techno-Research digital technician), to provide THE BEST on-highway volume, clarity and overall performance available, from your music source selections of FM stereo, XM sat radio, Smartphone or USB thumb drive.

(Harley Infotainment/BoomBox radio can also be shipped to the J&M factory in Tucson for FLASHING, there is a separate $75 fee for the “J&M Corporation Custom Audio” Harley radio FLASH).

To alter these DSP settings using the internal programming dongle already built into this new amplifier, (USB computer connection cable included) our specific custom amplifier programs are now available as a consumer download from the J&M website, along with the custom Bike-Builder’s-App for those who want to fine tune their own specific amplifier adjustments.

Custom made plug-n-play wiring harnesses are included, along with heavy gauge power/ground wires for the fused battery connection, all necessary mounting hardware & complete installation/operation instructions.

Amplifier itself measures 8 1/4” Long X 5 1/8” Wide X 1 5/8” Tall.



Fits: 2014-2020 Harley Street Glide Models w/ Rear or Lower Fairing Speakers- Non CVO

More Information
Brand J&M
Finish XXRP
Manufacturer Part No. JAMP-800HC14-SGP-ST5
Fitment 2014-2020 Harley-Davidson Street Glide Models w/ Rear or Lower Fairing Speakers- Non CVO
Additional Notes cc
Ships Within: 5-7 Days

2014-2020 Harley-Davidson Street Glide Models w/ Rear or Lower Fairing Speakers- Non CVO

Two-Year Limited Warranty�
J&M Corporation warrants each new product it manufactures to be free from defective materials and workmanship. J&M agrees to remedy any such defect or replace the unit (at our option), provided the unit is delivered to us, intact, with all transportation charges prepaid to our factory, for a period of two (2) years from date of sale to the original purchaser. The provisions of this warranty shall not apply to any unit which has been subjected to misuse, neglect, incorrect mechanical or electrical installation, unauthorized modifications, accidents, nor to units which have been repaired or altered outside of our factory.

Products purchased directly from J&M will be automatically registered to the owner for purposes of product warranty.

cc

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Price Match Guarantee
© 2024 Eastern Performance. All Rights Reserved.