Raw Dropped Swingarm 2" Lower Harley 4 Speed Chain Drive FL FX 73-84
Raw finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle.
Axle slots are 3/4", for disc brake applications.
Swingarm is for use with 4 speed models.
Lowers bike 2" and lengthens wheel base 1/2". Axle lowering plates take screw type adjusters.
The blocks also have tabs to mount a sissy bar or fender brace to facilitate mounting the rear fender to the swingarm, for the "floating" rear fender look.
There are 5/16 x 18 drilled and tapped holes on the swing arm for mounting and "floating".
*NOTE: Must order swingarm pivot pin assembly separately.
*NOTE: Race is installed, but the bearings are not included.
Raw finish dropped swingarm features a raised up axle position, so this lowers the swingarm and chassis in relation to the axle.
Axle slots are 3/4", for disc brake applications.
Swingarm is for use with 4 speed models.
Lowers bike 2" and lengthens wheel base 1/2". Axle lowering plates take screw type adjusters.
The blocks also have tabs to mount a sissy bar or fender brace to facilitate mounting the rear fender to the swingarm, for the "floating" rear fender look.
There are 5/16 x 18 drilled and tapped holes on the swing arm for mounting and "floating".
*NOTE: Must order swingarm pivot pin assembly separately.
*NOTE: Race is installed, but the bearings are not included.
| Brand | V-Twin |
|---|---|
| Manufacturer Part No. | 51-0783 |
| Fitment |
|
| Additional Notes | cc |
| Ships Within: | 2-4 Days |
- FX 1973-1984 chain drive models only
- FL 1973-1984 chain drive models only
Manufacturer's Warranty
cc
