S&S Cycle 585 EZ Easy Start Chain Drive Cams Lifters Quickee Pushrods Harley 99-06
IN BRAND NEW CONDITION
PART# 106-5299, 330-0518, 330-0175, 330-0547
DRAG PART # 9250524
TUCKER PART # 498067
Fits: 1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive ( Installation kit required for proper installation - sold separately) 1999 Twin Cam will need to use the splined cam drive OEM 25716-99
- 585CE Easy Cams 106-5299
- Premium Tappets - 330-0175
- Cam Chain Tensioner Kit - 330-0518
- Cam Install Kit w/ Quickee Pushrods - 330-0547
- Made in the U.S.A.
585 EZ CAMS
- Start any engine regardless of displacement or compression ratio with a stock starter
- Save your starter and battery; tested for 10,000 starts without running battery down
- Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- All chain-drive cams include installation kit
- Made in the U.S.A.
- Great results from 3000-6000 rpm
- 99-04 models require high-lift springs
- Optimized for 95" to 106" with slip-on mufflers, high-flow air filter and 9.0 to 10.5:1 compression
Grind | Open | Close | @ .053 | Valve Lift |
585 EZ Start |
||||
Intake | 20° | 45° | 245° | .585 |
Exhaust | 60° | 20° | 260° | .585 |
Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
Exhaust | 36 Degree | 04/04 Degree | 220/220 Degree | .473 |
IN BRAND NEW CONDITION
PART# 106-5299, 330-0518, 330-0175, 330-0547
DRAG PART # 9250524
TUCKER PART # 498067
Fits: 1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive ( Installation kit required for proper installation - sold separately) 1999 Twin Cam will need to use the splined cam drive OEM 25716-99
- 585CE Easy Cams 106-5299
- Premium Tappets - 330-0175
- Cam Chain Tensioner Kit - 330-0518
- Cam Install Kit w/ Quickee Pushrods - 330-0547
- Made in the U.S.A.
585 EZ CAMS
- Start any engine regardless of displacement or compression ratio with a stock starter
- Save your starter and battery; tested for 10,000 starts without running battery down
- Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- All chain-drive cams include installation kit
- Made in the U.S.A.
- Great results from 3000-6000 rpm
- 99-04 models require high-lift springs
- Optimized for 95" to 106" with slip-on mufflers, high-flow air filter and 9.0 to 10.5:1 compression
Grind | Open | Close | @ .053 | Valve Lift |
585 EZ Start |
||||
Intake | 20° | 45° | 245° | .585 |
Exhaust | 60° | 20° | 260° | .585 |
Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
Exhaust | 36 Degree | 04/04 Degree | 220/220 Degree | .473 |
Brand | S&S Cycle |
---|---|
Finish | Raw |
Drag Part # | 9250524 |
Tucker Part # | 498067 |
Manufacturer Part No. | 106-5299, 330-0518, 330-0175, 330-0547 |
Fitment | 1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive ( Installation kit required for proper installation - sold separately) 1999 Twin Cam will need to use the splined cam drive OEM 25716-99 |
Ships Within: | 5-7 Days |
1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive ( Installation kit required for proper installation - sold separately) 1999 Twin Cam will need to use the splined cam drive OEM 25716-99
Manufacturer's Warranty