S&S Zippers Milwaukee Eight 468 Cam Power Kit Harley M8 17-Up - Black
Kit includes Zippers 468 Cam, S&S Black Pushrods, S&S lifters, S&S tappet cuffs, S&S install kit.
Zippers Performance 413-810 Red Shift RS 468 Cam Shaft:
- New from Red Shift Cams® is the 468 bolt-in grind for 107 and 114" Milwaukee-Eight® engines. The 468 delivers significant improvements in power and throttle response right where you ride.
- The Red Shift 468 is designed to compliment the 4-valve heads' high intake flow while its unique design overcomes the restrictive exhaust port for big gains in both torque and horsepower. The 468 provides instant acceleration below 2,000 RPM while pulling strong to 6,000 – really shining in the 2,000-4,000 RPM cruising range.
- Cranking compression is unchanged for easy starting, and proprietary Red Shift Cams® ramp design delivers quiet operation and long valvetrain life. Works well with the factory Touring header pipe as well as aftermarket racing exhaust systems.
S&S Cycle Quickee Pushrod Kit with Black Covers
- Kit will accommodate all displacements from 88 to 124"
- Kit includes: Quickee pushrod kit, chrome pushrod covers, O-rings and cover keepers
- Design permits a simple, trouble free installation that does not require removal of the gas tank, rocker assemblies or even the tappet cover
- Can be installed or removed from an assembled engine
S&S Cycle Precision Tappet Set 4 Lifters Kit
- Reduced valve train noise from startup to shutdown
- Close tolerance for low leak-down rates - fast pump-up and superior high rpm performance
- Low mass, bearing grade, silicon nitride check ball and lighter check ball spring - enhances fast pump-up and quiet operation
- 100% tested to ensure that leak down and top end oil flow are within specification
S&S Tappet Block Cuffs Anti Rotation Valve Guides Plate
- Hard anodized black coating
- Billet aluminum construction
- Stronger material eliminates distortion
- Improve tappet stability in high lift and high rpm situations
- An easy upgrade when changing tappets or doing a cam change
S&S Cycle Chain Drive Camshaft Installation Kit
- Everything needed to service Chain Drive Cams in an M8 model
- Inner Cam Bearing
- Cam Cover Gasket
- O-Rings
Kit includes Zippers 468 Cam, S&S Black Pushrods, S&S lifters, S&S tappet cuffs, S&S install kit.
Zippers Performance 413-810 Red Shift RS 468 Cam Shaft:
- New from Red Shift Cams® is the 468 bolt-in grind for 107 and 114" Milwaukee-Eight® engines. The 468 delivers significant improvements in power and throttle response right where you ride.
- The Red Shift 468 is designed to compliment the 4-valve heads' high intake flow while its unique design overcomes the restrictive exhaust port for big gains in both torque and horsepower. The 468 provides instant acceleration below 2,000 RPM while pulling strong to 6,000 – really shining in the 2,000-4,000 RPM cruising range.
- Cranking compression is unchanged for easy starting, and proprietary Red Shift Cams® ramp design delivers quiet operation and long valvetrain life. Works well with the factory Touring header pipe as well as aftermarket racing exhaust systems.
S&S Cycle Quickee Pushrod Kit with Black Covers
- Kit will accommodate all displacements from 88 to 124"
- Kit includes: Quickee pushrod kit, chrome pushrod covers, O-rings and cover keepers
- Design permits a simple, trouble free installation that does not require removal of the gas tank, rocker assemblies or even the tappet cover
- Can be installed or removed from an assembled engine
S&S Cycle Precision Tappet Set 4 Lifters Kit
- Reduced valve train noise from startup to shutdown
- Close tolerance for low leak-down rates - fast pump-up and superior high rpm performance
- Low mass, bearing grade, silicon nitride check ball and lighter check ball spring - enhances fast pump-up and quiet operation
- 100% tested to ensure that leak down and top end oil flow are within specification
S&S Tappet Block Cuffs Anti Rotation Valve Guides Plate
- Hard anodized black coating
- Billet aluminum construction
- Stronger material eliminates distortion
- Improve tappet stability in high lift and high rpm situations
- An easy upgrade when changing tappets or doing a cam change
S&S Cycle Chain Drive Camshaft Installation Kit
- Everything needed to service Chain Drive Cams in an M8 model
- Inner Cam Bearing
- Cam Cover Gasket
- O-Rings
Brand | Zipper's Performance |
---|---|
Machine Type | street_motorcycle |
Finish | Chrome |
Drag Part # | 0928-0096, 0929-0085, 0929-0075, 0950-0861 |
Tucker Part # | 482170, 501000, 487170, 482088 |
Manufacturer Part No. | 413-810, 330-0718, 330-0655, 330-0619, 930-0137 |
Fitment |
|
Additional Notes | bw |
Ships Within: | 24 Hrs |
- 2017-2023 Harley-Davidson Milwaukee Eight
S&S Cycle Manufacturer's Warranty
bw