S&S Cycle 585 EZ Easy Start Gear Drive Cams .585 Lift Harley Twin Cam 07-16

$1,070.95 $1,070.95 To see product price, add this item to your cart. You can always remove it later. What's this?

In stock

SKU

SS106-5225

IN BRAND NEW CONDITION

PART # 106-5225

DRAG PART # 0925-0451

TUCKER PART # 498459

Fits: 2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

Great results from 3000-6000 rpm
99-04 models require high-lift springs
Optimized for 95" to 106" with slip-on mufflers, high-flow air filter and 9.0 to 10.5:1 compression

Grind	Open	Close	@ .053	Valve Lift
Stock Carburetors/Injected Cams
Intake	-02° / 02°	38°/34°	216°/216°	.473
Exhaust	36 Degree	04/04 Degree	220/220 Degree	.473

IN BRAND NEW CONDITION

PART # 106-5225

DRAG PART # 0925-0451

TUCKER PART # 498459

Fits: 2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

Great results from 3000-6000 rpm
99-04 models require high-lift springs
Optimized for 95" to 106" with slip-on mufflers, high-flow air filter and 9.0 to 10.5:1 compression

Grind	Open	Close	@ .053	Valve Lift
Stock Carburetors/Injected Cams
Intake	-02° / 02°	38°/34°	216°/216°	.473
Exhaust	36 Degree	04/04 Degree	220/220 Degree	.473

More Information
Brand	S&S Cycle
Finish	Raw
Drag Part #	0925-0451
Tucker Part #	498459
Manufacturer Part No.	106-5225
Fitment	2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models
Ships Within:	24 Hrs