S&S Cycle 551C Grind Chain Drive Bolt In Cam Kit .551 Lift Harley Twin Cam 99-06
In stock
SKU
SS330-0002
IN BRAND NEW CONDITION
PART # 330-0002
DRAG PART # 0925-0526
TUCKER PART # 498045
Fits: 1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive
- Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #288015 be used
- Made in the U.S.A.
Note: Installation kit required for proper installation - sold separately. 1999 Twin Cam will need to use the splined cam drive OEM 25716-99
551 SERIES GRIND CAMS
- 99-04 models require high lift springs
- Can be used with stock pushrods, springs and lifters
- Strongest from 1,000-4,000 rpm
- More power across the rpm range, with improved low and midrange torque
- Designed as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9
| Grind | Open | Close | @ .053 | Valve Lift |
551 Series |
||||
| Intake | 18° | 20° | 215° | .551 |
| Exhaust | 39° | 15° | 237° | .551 |
| Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
| Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
| Exhaust | 36° | 04/04° | 220/220° | .473 |
IN BRAND NEW CONDITION
PART # 330-0002
DRAG PART # 0925-0526
TUCKER PART # 498045
Fits: 1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive
- Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #288015 be used
- Made in the U.S.A.
Note: Installation kit required for proper installation - sold separately. 1999 Twin Cam will need to use the splined cam drive OEM 25716-99
551 SERIES GRIND CAMS
- 99-04 models require high lift springs
- Can be used with stock pushrods, springs and lifters
- Strongest from 1,000-4,000 rpm
- More power across the rpm range, with improved low and midrange torque
- Designed as bolt-in cam for touring bikes with compression ratio between 9:1 and 9:9
| Grind | Open | Close | @ .053 | Valve Lift |
551 Series |
||||
| Intake | 18° | 20° | 215° | .551 |
| Exhaust | 39° | 15° | 237° | .551 |
| Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
| Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
| Exhaust | 36° | 04/04° | 220/220° | .473 |
| Brand | S&S Cycle |
|---|---|
| Finish | Raw |
| Drag Part # | 0925-0526 |
| Tucker Part # | 498045 |
| Manufacturer Part No. | 330-0002 |
| Fitment | 1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive |
| Ships Within: | 24 Hrs |
1999-2006 Harley-Davidson Twin Cam Models (Excluding 06 Dyna) with Chain Drive
S&S Cycle Manufacturer's Warranty
Write Your Own Review
