S&S Cycle 625 EZ Easy Start Gear Drive Cams .625 Lift Harley Twin Cam 07-16
In stock
Only 1 left
SKU
SS106-5229
IN BRAND NEW CONDITION
PART # 106-5229
DRAG PART # 0925-0452
TUCKER PART # 498460
Fits: 2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models
- Start any engine regardless of displacement or compression ratio with a stock starter
- Save your starter and battery; tested for 10,000 starts without running battery down
- Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- All gear-drive cams include 4-gear set and installation kit
- Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
- Made in the U.S.A.
625 EZ CAMS
- For 95/96/103/110 cubic-inch engines
- Compression ratios from 10:1 to 10.75:1
- High-lift springs required for all applications
| Grind | Open | Close | @ .053 | Valve Lift |
625 EZ Start |
||||
| Intake | 20° | 55° | 255° | .625 |
| Exhaust | 60° | 20° | 260° | .625 |
| Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
| Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
| Exhaust | 36 Degree | 04/04 Degree | 220/220 Degree | .473 |
IN BRAND NEW CONDITION
PART # 106-5229
DRAG PART # 0925-0452
TUCKER PART # 498460
Fits: 2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models
- Start any engine regardless of displacement or compression ratio with a stock starter
- Save your starter and battery; tested for 10,000 starts without running battery down
- Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- All gear-drive cams include 4-gear set and installation kit
- Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
- Made in the U.S.A.
625 EZ CAMS
- For 95/96/103/110 cubic-inch engines
- Compression ratios from 10:1 to 10.75:1
- High-lift springs required for all applications
| Grind | Open | Close | @ .053 | Valve Lift |
625 EZ Start |
||||
| Intake | 20° | 55° | 255° | .625 |
| Exhaust | 60° | 20° | 260° | .625 |
| Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
| Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
| Exhaust | 36 Degree | 04/04 Degree | 220/220 Degree | .473 |
| Brand | S&S Cycle |
|---|---|
| Finish | Raw |
| Drag Part # | 0925-0452 |
| Tucker Part # | 498460 |
| Manufacturer Part No. | 106-5229 |
| Fitment | 2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models |
| Ships Within: | 10+ Days |
2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models
S&S Cycle Manufacturer's Warranty
Write Your Own Review
