S&S Cycle 635 HO EZ Easy Start Gear Drive Cams .635 Lift Harley Twin Cam 07-16

$1,070.95 $1,070.95 To see product price, add this item to your cart. You can always remove it later. What's this?

In stock

Only 1 left

SKU

SS330-0339

IN BRAND NEW CONDITION

PART # 330-0339

DRAG PART # 0925-0834

TUCKER PART # 483992

Fits: 2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

RPM range 4000-6500
High-power cam for modified engines, increase compression, high lift springs and large bore throttle body required
For best results, requires ported heads and low restriction intake/exhaust

Grind	Open	Close	@ .053	Valve Lift
Stock Carburetors/Injected Cams
Intake	-02° / 02°	38°/34°	216°/216°	.473
Exhaust	36 Degree	04/04 Degree	220/220 Degree	.473

IN BRAND NEW CONDITION

PART # 330-0339

DRAG PART # 0925-0834

TUCKER PART # 483992

Fits: 2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models

Start any engine regardless of displacement or compression ratio with a stock starter
Save your starter and battery; tested for 10,000 starts without running battery down
Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
All gear-drive cams include 4-gear set and installation kit
Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
Made in the U.S.A.

RPM range 4000-6500
High-power cam for modified engines, increase compression, high lift springs and large bore throttle body required
For best results, requires ported heads and low restriction intake/exhaust

Grind	Open	Close	@ .053	Valve Lift
Stock Carburetors/Injected Cams
Intake	-02° / 02°	38°/34°	216°/216°	.473
Exhaust	36 Degree	04/04 Degree	220/220 Degree	.473

More Information
Brand	S&S Cycle
Finish	Raw
Drag Part #	0925-0834
Tucker Part #	483992
Manufacturer Part No.	330-0339
Fitment	2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models
Ships Within:	24 Hrs