S&S Cycle Black Twin Cam High Performance Engine 4.125" Bore Case Harley 07-16
IN BRAND NEW CONDITION
PART # 310-0369
DRAG PART # 0920-0093
TUCKER PART # 483943
Fits: 2007-2016 Harley-Davidson Touring Models Only
- Replacement Twin Cam "A" engine cases for stock H-D chassis only (carb and EFI)
- Feature greater overall strength than stock crankcases
- Strong, dependable Timken®-style sprocket shaft bearings
- Clearanced for strokes up to and including 5"
- All passages between the crankcase cam support plate are O-ring sealed
- Compatible with most stock components
- Cam chest has clearance for up to .675" lift cams
- Include S&S crankcase breather reed valve designed to eliminate oil carry-over and oil scavenging problems
- Rear motor mount bolts directly to the stock transmission; fully compatible with the stock primary, charging system, and other stock components
- 4.125" bore engines with stock stud pattern (ideal for custom applications and for use with the S&S 124" Hot Set Up Kit)
- Black powder-coat
- Made in the U.S.A.
NOTE: Installation in 07-15 FL, FLHT, FLHR, FLHX, FLTR models require oil line installation kit PART #310-0435.
NOTE: To ease installation in 07-15 FL, FLHT, FLHR, FLHX, FLTR models use PART #530-0006.
NOTE: This project requires a skilled technician. It is the responsibility of the person assembling the parts to check all clearances and assembly specifications.
IN BRAND NEW CONDITION
PART # 310-0369
DRAG PART # 0920-0093
TUCKER PART # 483943
Fits: 2007-2016 Harley-Davidson Touring Models Only
- Replacement Twin Cam "A" engine cases for stock H-D chassis only (carb and EFI)
- Feature greater overall strength than stock crankcases
- Strong, dependable Timken®-style sprocket shaft bearings
- Clearanced for strokes up to and including 5"
- All passages between the crankcase cam support plate are O-ring sealed
- Compatible with most stock components
- Cam chest has clearance for up to .675" lift cams
- Include S&S crankcase breather reed valve designed to eliminate oil carry-over and oil scavenging problems
- Rear motor mount bolts directly to the stock transmission; fully compatible with the stock primary, charging system, and other stock components
- 4.125" bore engines with stock stud pattern (ideal for custom applications and for use with the S&S 124" Hot Set Up Kit)
- Black powder-coat
- Made in the U.S.A.
NOTE: Installation in 07-15 FL, FLHT, FLHR, FLHX, FLTR models require oil line installation kit PART #310-0435.
NOTE: To ease installation in 07-15 FL, FLHT, FLHR, FLHX, FLTR models use PART #530-0006.
NOTE: This project requires a skilled technician. It is the responsibility of the person assembling the parts to check all clearances and assembly specifications.
2007-2016 Harley-Davidson Touring Models Only
S&S Cycle Manufacturer's Warranty
