Tab Performance Black 2-into-2 Exhaust Head Pipes Harley Touring FLH/T 09-16
- Includes 220° full coverage heat shields
- Can be used with any corresponding bagger slip-on mufflers
- Includes both 18mm and 12mm O2 sensor bungs
- Does NOT contain a catalyst and my not be legal for road use
Looking to break away from the restrictions of a factory head pipe system? Want to be able to take full advantage of your aftermarket slip-ons? If so then these are the perfect head pipes for you. These 2-into-2 interconnected head pipes are built out of 1 ¾ inch 16 gauge mandrel bent, tubing and feature 220° full coverage heat shields. Our hidden inter-connect design maximizes top end horse power and low end torque when compared to your typical true dual systems while at the same time helping to balance flow and improve sound. Our crossover pipe uses an oval shaped design to maintain cross sectional area for flow while maximizing clearance for the best of both worlds. Includes all mounting hardware and new port gaskets. Mufflers not included.
These pipes can be installed at home with nothing more than a basic tool set and ready for rider enjoyment in as little as 15 minutes. This is truly a great product and provides great value to anyone looking to upgrade their bike.
These pipes will fit the following Harley-Davidson FL Touring 1993-2016 FLHT, FLHX, FLHR, and FLTR:
- FLHT/I Electra Glide Standard
- FLHTC/I Electra Glide Classic
- FLHTCU/I/SE/SE6 CVO Ultra Classic Electra Glide
- FLTRSE CVO Road Glide
- FLHTK Electra Glide Ultra Limited
- FLTRU/SE CVO Road Glide Ultra
- FLHR/I Road King
- FLHRC/I Road King Classic
- FLHRS/I Road King Custom
- FLTR/I Road Glide
- FLHX/I/SE/SE2 CVO Street Glide
- FLHTCUTG TriGlide
- FLHRSE Screamin’Eagle Road King
- FLHTCUSE CVO Ultra Classic Electra Glide
Blueing and/or discoloration is not covered under warranty, it is a result of improper tuning,cam timing, engine timing, jetting, overheating etc. It is not caused by defective manufacturing.The headers and components offered may not meet EPA emissions and noise guidelines and may be restricted to off-road use only. The name Harley-Davidson ® are trademarks of Harley-Davidson ® and is utilized for reference purpose only, and in no way are they intended to imply any association with Harley-Davidson ®.
- Includes 220° full coverage heat shields
- Can be used with any corresponding bagger slip-on mufflers
- Includes both 18mm and 12mm O2 sensor bungs
- Does NOT contain a catalyst and my not be legal for road use
Looking to break away from the restrictions of a factory head pipe system? Want to be able to take full advantage of your aftermarket slip-ons? If so then these are the perfect head pipes for you. These 2-into-2 interconnected head pipes are built out of 1 ¾ inch 16 gauge mandrel bent, tubing and feature 220° full coverage heat shields. Our hidden inter-connect design maximizes top end horse power and low end torque when compared to your typical true dual systems while at the same time helping to balance flow and improve sound. Our crossover pipe uses an oval shaped design to maintain cross sectional area for flow while maximizing clearance for the best of both worlds. Includes all mounting hardware and new port gaskets. Mufflers not included.
These pipes can be installed at home with nothing more than a basic tool set and ready for rider enjoyment in as little as 15 minutes. This is truly a great product and provides great value to anyone looking to upgrade their bike.
These pipes will fit the following Harley-Davidson FL Touring 1993-2016 FLHT, FLHX, FLHR, and FLTR:
- FLHT/I Electra Glide Standard
- FLHTC/I Electra Glide Classic
- FLHTCU/I/SE/SE6 CVO Ultra Classic Electra Glide
- FLTRSE CVO Road Glide
- FLHTK Electra Glide Ultra Limited
- FLTRU/SE CVO Road Glide Ultra
- FLHR/I Road King
- FLHRC/I Road King Classic
- FLHRS/I Road King Custom
- FLTR/I Road Glide
- FLHX/I/SE/SE2 CVO Street Glide
- FLHTCUTG TriGlide
- FLHRSE Screamin’Eagle Road King
- FLHTCUSE CVO Ultra Classic Electra Glide
Blueing and/or discoloration is not covered under warranty, it is a result of improper tuning,cam timing, engine timing, jetting, overheating etc. It is not caused by defective manufacturing.The headers and components offered may not meet EPA emissions and noise guidelines and may be restricted to off-road use only. The name Harley-Davidson ® are trademarks of Harley-Davidson ® and is utilized for reference purpose only, and in no way are they intended to imply any association with Harley-Davidson ®.
| Brand | Tab Performance |
|---|---|
| Manufacturer Part No. | 123-2200 |
| Muffler Finish | 00 |
| Tip Finish | 00 |
| Head Pipe Finish | No Head Pipe Included In Kit |
| Exhaust Diameter | 00 |
| Baffle | 00 |
| Fitment | 2009-2016 Harley-Davidson Touring Models |
| Additional Notes | cc |
| Ships Within: | 5-7 Days |
2009-2016 Harley-Davidson Touring Models
Manufacturer's Warranty
cc
