XK Chrome XK-WHIP-ADV 2pc LED Light Pole Whip Kit Bluetooth Off Road UTV Jeep
Built with 16 bit gamma correction, XKchrome provides over 16 million vibrant colors, allowing the user to choose any color with a single tap. Each controller has two zones that can simultaneously run different colors and patterns, allowing more room for creativity and uniqueness compared to other motorcycle LED lights. Up to 6 controllers (12 zones) can be connected at the same time.
Brake light visibility is the top concern for motorsports safety at night. Now with the integrated Smart Brake sensor wire, XKchrome can turn the entire led whip into a brake light! As soon as you apply the brake, XKchrome immediately switches all LED lights on in red. This significantly increases the atv/utv's visibility, and promotes faster reaction of the vehicle behind.
XKchrome's Music Sync feature enables lights to dance with the rhythm of any song in your phone, or with any sound picked up by the microphone. To maximize visual effect, our adaptive algorithm dynamically adjusts the volume sensitivity. No matter if it's a country music or a hard rock, just lay back and enjoy the full spectrum you defined for your favorite song.
With XKchrome's realtime "chameleon" feature, you can paint your ride with any color you see. Whether it's a bright shirt or a stunning paint job, just point your phone's camera to it. XKchrome instantly turns your ATV/UTV into the very same eye-catching color, without even a finger tap. Be prepared to be in AWE!
Over 15 themes for special occasions throughout the year. It even comes with an "emergency pattern" in case you parked at the side of the road in the dark. In addition, users can fully customize their own themes with various pattern, speed, and up to 10 color combinations.
- 1pc XKchrome BLE 4.0 app controller.
- ON/OFF switch wire.
- 2pc LED whips.
- Detailed Mounting Instrustions
SPECS:
- iOS device compatibility: iPhone 4S or higher; iPad 3 or higher; iPad Mini or higher, iPod Touch 5th gen or higher.
- Android device compatibility: Must be equipped with Bluetooth 4.0 (BLE) and Android 4.4 or higher version system.
- Max load: 3A per zone. (Each controller has 2 zones)
- Light power consumption: 1.6A per whip.
- Input voltage: 9-15V DC.
- Brake sensor input voltage: 12V.
- Reversed polarity protection: Yes.
- Transient voltage suppression: Yes.
- Controller Dimension: 4" x 2.33 x 0.73" (100 x 60 x 19cm)
Built with 16 bit gamma correction, XKchrome provides over 16 million vibrant colors, allowing the user to choose any color with a single tap. Each controller has two zones that can simultaneously run different colors and patterns, allowing more room for creativity and uniqueness compared to other motorcycle LED lights. Up to 6 controllers (12 zones) can be connected at the same time.
Brake light visibility is the top concern for motorsports safety at night. Now with the integrated Smart Brake sensor wire, XKchrome can turn the entire led whip into a brake light! As soon as you apply the brake, XKchrome immediately switches all LED lights on in red. This significantly increases the atv/utv's visibility, and promotes faster reaction of the vehicle behind.
XKchrome's Music Sync feature enables lights to dance with the rhythm of any song in your phone, or with any sound picked up by the microphone. To maximize visual effect, our adaptive algorithm dynamically adjusts the volume sensitivity. No matter if it's a country music or a hard rock, just lay back and enjoy the full spectrum you defined for your favorite song.
With XKchrome's realtime "chameleon" feature, you can paint your ride with any color you see. Whether it's a bright shirt or a stunning paint job, just point your phone's camera to it. XKchrome instantly turns your ATV/UTV into the very same eye-catching color, without even a finger tap. Be prepared to be in AWE!
Over 15 themes for special occasions throughout the year. It even comes with an "emergency pattern" in case you parked at the side of the road in the dark. In addition, users can fully customize their own themes with various pattern, speed, and up to 10 color combinations.
- 1pc XKchrome BLE 4.0 app controller.
- ON/OFF switch wire.
- 2pc LED whips.
- Detailed Mounting Instrustions
SPECS:
- iOS device compatibility: iPhone 4S or higher; iPad 3 or higher; iPad Mini or higher, iPod Touch 5th gen or higher.
- Android device compatibility: Must be equipped with Bluetooth 4.0 (BLE) and Android 4.4 or higher version system.
- Max load: 3A per zone. (Each controller has 2 zones)
- Light power consumption: 1.6A per whip.
- Input voltage: 9-15V DC.
- Brake sensor input voltage: 12V.
- Reversed polarity protection: Yes.
- Transient voltage suppression: Yes.
- Controller Dimension: 4" x 2.33 x 0.73" (100 x 60 x 19cm)
FITMENT:
- Universal for all motorcycles, ATV, snowmobiles, UTV and Jeeps with 12V DC.
| Brand | XK Chrome |
|---|---|
| Manufacturer Part No. | XK-WHIP-ADV |
| Fitment |
|
| Additional Notes | BI |
| Ships Within: | 5-7 Days |
- Universal for all motorcycles, ATV, snowmobiles, UTV and Jeeps with 12V DC.
Manufactures Warranty
BI
