Feuling 1108 Endurance Beehive Valve Spring & Retainer Kit Harley Milwaukee M8

$539.95
Only 1 left
SKU
FMC-1108

IN BRAND NEW CONDITION

Part # 1108

Drag # 0926-2974

Fits: 2017-2019 Harley-Davidson Miwaukee Eight Models

FEULING® ENDURANCE BEEHIVE® valve springs are a direct bolt in replacement, no spring seat or rocker cover machining required. Endurance springs are machined from a premium grade Hi-tensile chrome silicon single conical ovate wire, shot-peened with a specially processed thermal heat treat and super NexTex® finish to give these valve springs the needed fatigue life to exceed the high demands of V-Twin engines from stock to performance.

• FEULING® BEEHIVE® valve springs use a smaller lighter weight retainer which drastically reduces the valve weight creating a quicker revving and smoother motion than comparable dual or single valve springs.
• Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics!
• Available for 5/16, 7mm and 6mm valves 
• FEULING® BEEHIVE® valve springs are packaged as a matched set and must be installed at the correct OPEN HEIGHT. Matching max cam lift to the open height spec of the valve springs is essential for optimal valve-train operation and spring life. See included spring spec chart
• FEULING® endurance springs are a direct bolt-in replacement on EVO/Twin Cam up to 650 cam lift and Milwaukee Eight up to 565 cam lift with no machining or rocker box clearancing required.

Kits include: matched set of FEULING® ENDURACE BEEHIVE® valve springs, Ti retainers, machined spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with a spring loaded valve stem wiper system. 

Dont get stung by inferior valve springs!
Quicker Revving - Smoother Motion - Light Weight Ti Retainers - Bolt in up to 650 Lift on EVO/TC - 565 lift for M8

MILWAUKEE EIGHT

SEAT Lbs. / INSTALLED HEIGHT
134 Lbs. @ 1.375 (0.405 Lift)
127 Lbs. @ 1.405 (0.435 Lift)
125 Lbs. @ 1.415 (0.445 Lift)
121 Lbs. @ 1.435 (0.465 Lift)
116 Lbs. @ 1.455 (0.485 Lift)
113 Lbs. @ 1.470 (0.500 Lift)
109 Lbs. @ 1.490 (0.520 Lift)
103 Lbs. @ 1.520 (0.550 Lift)
226 Lbs @ 0.970 OPEN HEIGHT
Coil Bind @ .920

*Cam specs measured on the lifter @ 0.050 lift with 1.61 rocker arm ratio

Fitment:

  • 2017-2019 Harley-Davidson Miwaukee Eight Models with stock 6mm valve stems with triple groove, this kit includes Ti Retainers. Stock & SE heads

IN BRAND NEW CONDITION

Part # 1108

Drag # 0926-2974

Fits: 2017-2019 Harley-Davidson Miwaukee Eight Models

FEULING® ENDURANCE BEEHIVE® valve springs are a direct bolt in replacement, no spring seat or rocker cover machining required. Endurance springs are machined from a premium grade Hi-tensile chrome silicon single conical ovate wire, shot-peened with a specially processed thermal heat treat and super NexTex® finish to give these valve springs the needed fatigue life to exceed the high demands of V-Twin engines from stock to performance.

• FEULING® BEEHIVE® valve springs use a smaller lighter weight retainer which drastically reduces the valve weight creating a quicker revving and smoother motion than comparable dual or single valve springs.
• Eliminate valve spring separation, maximize stability, reduce valve-train noise & harmonics!
• Available for 5/16, 7mm and 6mm valves 
• FEULING® BEEHIVE® valve springs are packaged as a matched set and must be installed at the correct OPEN HEIGHT. Matching max cam lift to the open height spec of the valve springs is essential for optimal valve-train operation and spring life. See included spring spec chart
• FEULING® endurance springs are a direct bolt-in replacement on EVO/Twin Cam up to 650 cam lift and Milwaukee Eight up to 565 cam lift with no machining or rocker box clearancing required.

Kits include: matched set of FEULING® ENDURACE BEEHIVE® valve springs, Ti retainers, machined spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with a spring loaded valve stem wiper system. 

Dont get stung by inferior valve springs!
Quicker Revving - Smoother Motion - Light Weight Ti Retainers - Bolt in up to 650 Lift on EVO/TC - 565 lift for M8

MILWAUKEE EIGHT

SEAT Lbs. / INSTALLED HEIGHT
134 Lbs. @ 1.375 (0.405 Lift)
127 Lbs. @ 1.405 (0.435 Lift)
125 Lbs. @ 1.415 (0.445 Lift)
121 Lbs. @ 1.435 (0.465 Lift)
116 Lbs. @ 1.455 (0.485 Lift)
113 Lbs. @ 1.470 (0.500 Lift)
109 Lbs. @ 1.490 (0.520 Lift)
103 Lbs. @ 1.520 (0.550 Lift)
226 Lbs @ 0.970 OPEN HEIGHT
Coil Bind @ .920

*Cam specs measured on the lifter @ 0.050 lift with 1.61 rocker arm ratio

Fitment:

  • 2017-2019 Harley-Davidson Miwaukee Eight Models with stock 6mm valve stems with triple groove, this kit includes Ti Retainers. Stock & SE heads
More Information
Brand Feuling
Drag Part # 0926-2974
Manufacturer Part No. 1108
Fitment
  • 2017-2019 Harley-Davidson Miwaukee Eight Models with stock 6mm valve stems with triple groove, this kit includes Ti Retainers. Stock & SE heads
Additional Notes BI
Ships Within: 10+ Days

  • 2017-2019 Harley-Davidson Miwaukee Eight Models with stock 6mm valve stems with triple groove, this kit includes Ti Retainers. Stock & SE heads

Manufacture's Warranty

BI

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Price Match Guarantee
© 2023 Eastern Performance. All Rights Reserved.