Hertz Mille MP 25.3 PRO Tweeter Component Speaker 1.14"
Regular Price
$259.00
Special Price
$229.99
In stock
Only 1 left
SKU
HZ-MP253PRO
The MP 25.3 car audio tweeters, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response.
Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection.
The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.
1. Tetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances.
2. “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.
3. High density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.
4. 25mm ferrofluid-cooled mobile voice coil.
5. Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.
6. Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations.
7. Wide array of installation accessories, for an easy OEM integration.
The MP 25.3 car audio tweeters, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response.
Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection.
The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.
1. Tetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances.
2. “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.
3. High density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.
4. 25mm ferrofluid-cooled mobile voice coil.
5. Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.
6. Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations.
7. Wide array of installation accessories, for an easy OEM integration.
Fits:
Fits:
| Size mm (in.) | 29 (1.14) |
| Power Handling - PeakW | 120 (Hi-Pass filtered @ 2,5kHz - 12 dB Oct.) |
| Impedance ? | 4 |
| Frequency response Hz | 1.4k ÷ 22.5k |
| Sensitivity dB SPL | 91 |
| Voice coil Ø mm (in.) | 25 (1) |
| Magnet | Neodymium |
| Cone/Dome | Tetolon |
| Brand | Hertz Audio | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Finish | N/A | ||||||||||||||||
| Manufacturer Part No. | MP 25.3 PRO | ||||||||||||||||
| Fitment |
|
||||||||||||||||
| Additional Notes | CC | ||||||||||||||||
| Ships Within: | 5-7 Days |
| Size mm (in.) | 29 (1.14) |
| Power Handling - PeakW | 120 (Hi-Pass filtered @ 2,5kHz - 12 dB Oct.) |
| Impedance ? | 4 |
| Frequency response Hz | 1.4k ÷ 22.5k |
| Sensitivity dB SPL | 91 |
| Voice coil Ø mm (in.) | 25 (1) |
| Magnet | Neodymium |
| Cone/Dome | Tetolon |
All items covered by the manufacter's warranty
CC
Write Your Own Review
Related Products
Check items to add to the cart or
